_PRECAST MOULDS HAVE BEEN SUPPLIED IN FRANCE_
New tables for the production of panels and double mold for concrete beams.
Moldtech tilting table of 12,5x5 metros. The Moldtech tilting table of 12.5 meters enables the company to produce precast concrete elements of up to a thickness of 30cm and with a load of 750kg/m2. The tilting table will allow the company to easily lift the panel, reduce the amount of steel reinforcement, improve their de-molding system and assure an excellent wall panel finish. The table was conceived to be used with self-levelling concrete for which it was prepared with a special plate finish.
MOLDTECH Fixed table of 13x5 meters. French precasters normally use the fixed tables as a general casting surface where all kinds of different concrete elements are casted using magnetic shuttering. These elements can be architectural, structural or façade elements. It is for this reason that PREFA BRESSUIRAIS also bought from Moldtech a fixed table. This table, with a size of 13.5 x 5 meters and a load capacity of 750kg/m2, features lateral shuttering of 30cm height and offers great versatility for the production of flat and linear concrete elements.
MOLDTECH hydraulic double beam mould. Lastly, the supply consisted of the classic double beam mould, widely used in France but in this case with hydraulic opening and closing. The double beam mould has a length of 8 meters and will cover future production needs. Each line can produce a maximum section of 1.5 x 1.5 meters; however the longitudinal mid panel can be removed allowing casting widths of 3.1 meters x 1.5 meters. All surfaces directly in contact with the concrete have a special polish so self-leveling concrete can be used. The mould has also gangways in accordance to the safety regulations.