- Projects
- Mould for crane conterweights
Mould for crane conterweights
ACCESORIES

Zaragoza, Spain
2020
12 Calle Hernán Cortés
Zaragoza, Aragón.
España ,50004
Zaragoza, Aragón.
España ,50004
- Built with 4 detachable parts that are bolted together and onto a bottom baseplate to form the special geometry of these counterweights. This mould is also assembled hinged onto a frame that allows turning it 180º with the help of the crane to fill with concrete in the most suitable position and flip it for better demoulding.
- The counterweights are casted with special recesses that are made with steel formers that are bolted inside the mould walls and removed after curing, before demoulding. Once removed, these steel formers are fixed on the turning frame with quick locks.
- The turning frame is built with neoprene pads to support the mould in both positions and to avoid damage while turning.
Related Projects
-
_MOLDTECH SUPPLIES MOULDS FOR WATER CHANNELS_
-
_WE SUPPLIED A UNIVERSAL PRESTRESSING BED SYSTEM OF 1000 TONS IN MEXICO_
-
_MOMBASA RING ROAD PROJECT, AFRICA_
-
_TABLES FOR THE PRODUCTION OF PANELS AND DOUBLE MOULD FOR CONCRETE BEAMS IN FRANCE_
-
_FLEXIBLE MOULD FOR STAIRCASES (VERTICAL CASTING)_
-
_MOLDTECH CONCLUDES INSTALLATION OF 3D MOULDS IN SAUDI ARABIA_
-
_MOLDTECH´S PRESENCE IN SOUTH AMERICA INCREASES_
-
_SPECIAL MOULD FOR WATER CHANNELS_
-
_BATTERY TABLES TO PRODUCE BEAMS IN FRANCE_
-
Mega project in Romania
-
Special moulds for housing
-
180º TURNER IN MALAYSIA
-
Moulds for precast concrete in Africa
-
Mould for crane conterweights
-
Innovative box culvert wet cast solution for Canadian client
-
Equipment for a new precast plant in Casablanca, Morocco
-
Double column mould for Mexico
-
Tilting table in La Coruña, Spain
-
Stationary tables for half-slabs in he Philippines
-
Infrastructure equipments in Guinea Conakry
-
Full precast plant in Mexico
-
MT20 box culvert production system
-
Tilting tables for wall panels
-
Tilting tables in Canada
-
Fixed tables for wall panels
-
Installation for industrial manufacturing
-
Special fixed table for preslab
-
3D moulds in Sweden
-
Complete plant in USA
-
Fixed table in Norway
-
Manufacturing facility in Romania
-
Fixed table for predalle in France
-
Tilting table in Spain
-
Industrial plant for precast power substations
-
Production lines for girders in Slovakia
-
Precast plant equipments
-
High-capacity 180º turner
-
Moulds for box culverts in Lerida
-
Precast power substations production plant
-
180º turning machines for 3D modules
-
Complete plant for bridges
-
MT20 dry cast box culvert equipment
-
Carrousel plant
-
3D hydraulic moulds
-
Tilting tables
-
Automatic moulds for columns
-
Moulds for bridge
-
Modular mould for wet cast box culverts
-
Self-supporting system for bridge girders
-
Pouring buckets and box culvert turner
-
MOULD FOR DOUBLE CHANNEL
-
MODULAR MOULD SYSTEM FOR BOX CULVERTS
-
MODULAR MOULD FOR WET-CAST BOX CULVERTS
-
MODULAR MOULD FOR WET-CAST BOX CULVERTS
-
COMPLETE PLANT FOR THE PRODUCTION OF PRECAST INDUSTRIAL WAREHOUSES
-
ARCHITECTURAL ENCLOSING PANELS IN VERTICAL BATTERY MOULD
-
FLAT PANELS AND L-SHAPED WALLS
-
DRAINAGE ELEMENTS
-
BATTERY MOULDS FOR THE PRODUCTION OF LIGHTWEIGHT PANELS
-
MOULDS FOR NEW JERSEY BARRIER
-
MOULD FOR TT SLABS
-
FACTORY FOR PRE-STRESSED ELEMENTS
-
TILTING TABLE FOR CLOSURE PANELS
-
MODULAR MOULD FOR WET-CAST BOX CULVERTS
-
EQUIPMENT FOR THE PRODUCTION OF 3D ELEMENTS
-
FIXED TABLES WITH PLOTTER ON RAILS
-
MOULDS FOR BASEMENT COLUMNS
-
AUTOMATIC MACHINES FOR PRODUCTION CHAIN OF PRECAST PANELS
-
MOULD FOR STADIUM BLEACHER ELEMENTS
-
RESIDENTIAL PROJECT
-
FACTORY FOR THE PRODUCTION OF PRESTRESSED BEAMS AND PANELS
-
COMPLETE FACTORY FOR INDUSTRIAL BUILDINGS
-
PRISON CELLS
-
AUTO-RESISTANT MOULD FOR PRE-STRESSED TT SLAB
-
EQUIPMENT FOR PRODUCTION OF ROADWAY PRECAST ELEMENTS IN TOGO, BENIN AND GUINEA CONAKRY
-
MOULDS FOR NEW JERSEY BARRIERS
-
MOULD SIDES FOR DELTA GIRDER
-
FIXED TABLES
-
EQUIPMENT FOR THE PRODUCTION OF BOX CULVERTS
-
SIDES AND MOULDING FRAME FOR PRE-STRESSED ‘OMEGA’ BEAM
-
TILTING TABLES
-
MT20 FOR PRECAST DRY-CAST BOX CULVERTS
-
EQUIPMENT FOR BOX CULVERTS
-
TILTING MOULDS FOR L-SHAPED WALL SEGMENTS
-
INSTALATION 2,000 METERS OF HYDRAULIC BEAM MOULDS FOR THE PRODUCTION OF BEAMS FOR RESIDENTIAL PROJECTS
-
EQUIPMENT FOR THE PRODUCTION OF PRECAST PANELS, FOR INDUSTRIAL AND RESIDENTIAL PROJECTS
-
MANUFACTURE AND INSTALLATION OF DOUBLE BOOK MOULDS AND TILTING TABLES FOR SPECIAL PANELS
-
COMPLETE FACTORY FOR PANEL PRODUCTION
-
TURN-KEY PROJECT FOR PRECAST PLANT FOR THE CONSTRUCTION OF RESIDENTIAL HOUSING UNITS
-
MODULAR MOULDS FOR HALF-FRAMES
-
COMPLETE FACTORY FOR THE PRODUCTION OF PRE-STRESSING ELEMENTS AND CLOSING PANELS
-
COMPLETE FACTORY FOR THE PRODUCTION OF (PRE-STRESSED) CONCRETE ELEMENTS FOR INDUSTRIAL AND COMERCIAL BUILDINGS AND BRIDGES
-
COMPLETE FACTORY INSTALLATION FOR PRE-STRESSED ELEMENTS AND PANELS FOR INDUSTRIAL AND COMMERCIAL BUILDINGS
-
EQUIPMENT FOR BOX CULVERTS
-
_PRECAST MOULDS HAVE BEEN SUPPLIED IN FRANCE_